Winding machine Introduction

The winder is a special equipment for the textile industry. As the last process of spinning and the first process of weaving, the winding machine plays a "bridge" role, and thus plays an important role in the textile field.

Features

1. Change the package and increase the yarn capacity of the yarn package: connect the tube yarns (or skeins) with less capacity through the winding tube to make the package with larger capacity. The capacity of one package is equivalent to two. More than ten bobbins. The cheese can be used for warping, twisting, wefting, dyeing, weft yarn on a shuttleless loom, and knitting yarn. If these processes are used directly, the number of stoppages will be too large, which will affect the improvement of production efficiency and also affect the improvement of product quality. Therefore, increasing the package capacity is a necessary condition for improving the productivity and quality of the subsequent processes.

2. Remove defects on the yarn to improve yarn quality: There are some defects and impurities on the yarn produced by the cotton mill, such as thick sections, details, double yarns, weak crepe, neps, etc. When the winding is performed, the yarn is inspected by the yarn clearing device to remove the defects and impurities on the yarn which have an influence on the quality of the fabric, thereby improving the uniformity and smoothness of the yarn, so as to reduce the breakage of the yarn in the subsequent process. To improve the appearance quality of the fabric. It is most reasonable to remove the defects and impurities on the yarn during the winding process, because the work of each package is carried out independently during the winding process, and the other packages can continue to work without being affected when the package is broken.

Process requirements

1. The winding tension is appropriate and does not damage the original physical and m      echanical properties of the yarn.

2. The package volume is large, the shape is good, and it is easy to unwind.

3. The yarn joint is small and firm, and the knotless yarn is formed as much as possible.

4. The package used for warping should be fixed length, and the structure used for dyei    ng the package should be uniform (volume uniformity).